What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 11:15
For this case there are devices called Metal oxide varistors (MOV).
A circuit breaker is similar, but is resettable.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Why don't people like Nickelback?
What is lightning?
I post the exact comment here.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
First Sentence:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Is it just me, or do we all hate Sasuke from Naruto?
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–10[John johnson John Johnson ]
This device then solves the entire problem.
These are simplified answers to the original question, and does not change anything I wrote above.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
What is the most memorable thing that happened in your college days?
2024–10–16 [ OO OLAOYE OYEBODE ]
Barnstars:
There are three different concepts here that are getting confused.
This one hit behind the barn.
But… the neutral is now “floating” because of the 1 ohm resistance.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Reds star Elly De La Cruz homers after learning of the death of his sister - AP News
What does a fuse do?
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Lawsuit says mayor called people who opposed Buc-ee's project 'terrorists' - 9News
At least they know the answer if they wanted it.
This is 'the assistant's answer'
So, the voltage could go up to 500 volts, and the fuse will not open up.
Procter & Gamble to cut 7,000 jobs as part of broader restructuring - CNBC
This is where the MOV conducts again, and dissipated the energy.
the problem then depends on "how fast does the fuse operate?".
An AC voltage/ current source, and an ac inductive load.
Blink and your AI security playbook is out of date - Axios
[old diagram got deleted by accident]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Now when you have a certain ac resistance, then a current flows in a loop.
nine
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–14 [Omar Gharbi Omar Gharbi ]
It also is a device that limits the change in current flow.
There are two important concepts here.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Edit 2024–10.
Here is a simplified AC power diagram.
He then asserts :
so, what happens?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
eight
The MOV will conduct when the voltage exceeds 50% of line voltage.
Upvotes:
One
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The other is “what does a “fuse” do?”
what exactly is a ‘surge’ protector?
Because the load is inductive, the current lags the voltage.(by a bit).
A fuse is a non-resetable over current circuit protector.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but I think this circuit , shows a few more pieces.
The third is lightning and “how it gets conducted into a home.”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes the function of a fuse.
The bolt then partially travels down the line to your home.
At one ohm, the resistor has a maximum of 1 watt power.
In schematic diagrams this is the symbol for a fuse:
(Dc diagram shown, AC is similar).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
He then describes Rainy Season and Lightning.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
a photo is worth a thousand words.
One is “what exactly is in a ‘surge protector’ ? ”
But it can get overloaded, and no longer works.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
[image of Common-mode choke]